Cart
close× Call Us +1 (866) 278 4130

Mechanical Meter that will still count your water usage even in the event of a power failure. this meter consist of a dome that is on the back of the 5600 valve. Inside this dome is an impeller. Coming off the top of the dome is a cable that runs to the meter assembly that is attached to the 5600 controller. When you use water, the impeller turns and that turns the cable, the cable is what turns the meter assembly which is where you have set the amount of gallons you are going to use before a regeneration.: The 5600 Valve has been in production since 1979!

Features:

1). Simple mechanical design is easy to understand.

2). Two valve body designs: one for downflow regeneration and one for upflow (covers every valve in the 5600 family - quick access to all internal components).

3). Injector/drain modules containing the brine valve, flow controls and injector are removable from the valve's exterior.

4). Ruggedly built timer is designed with heavy-duty 3/8" wide plastic gears.

5). 5600 controls are user friendly and easy to program.

6). Non-corrosive, UV-resistant fiber-reinforced polymer valve body.

7). Economical - small annual power consumption; keeps the time and activates the piston/valve mechanics with a single motor.

8). Designed with double backwash

All Systems Come Completely Put Together. All you have to do is add the resin included with your water softener. It is easy to add and is explained in our online installation guide. We even supply you with the special media funnel for easier application.

Our Guarantee.
Product materials and workmanship are protected with a written warranty you can depend on!

  • Ten Years On Structural Wound Resin Tank and Brine Tank
  • Five Years On Fleck Valve
  • We also supply you with a lifetime worth of technical support!

All Of These Options Are Included At No Additional Charge.

Q. What is a Bypass Valve for?

A. The Bypass valve is needed to put the water softener in bypass and still have water to the house. It's like having insurance it is there if you need it, but is seldom used. Note: if you already have a bypass valve installed in your plumbing system, use the Bypass Valve drop down menu to remove it from your order. This will lower your price by $10.00.

Q. What is a Safety Float?

A. The safety float is an emergency float. Its function is to make sure that the salt tank cannot overflow salt water all over your floor if the injectors on the water softener valve get plugged up. Without the safety float you could have a mess on your hands not to mention possible damage to the floor.

Q. What is a Brine Well for?

A. Brine well isolates the air check valve on the safety float from the rock salt or potassium chloride a substitute for rock salt that is environmentally friendly and healthy for humans from clogging up the air check valve and the water softener valve.

Q. What is a Grid Plate AKA Salt Platform?

A. Grid plate is at the bottom of the salt tank its purpose is to help the salt or potassium chloride from bridging up hardening over the top of the water. When this happens the water can’t dissolve the salt so when the water softener regenerates the resin beads will not get charged and your water will be hard.

Q. Why is the 8% Crosslink Resin better?

A. 8% crosslink is more resistant against chlorine than the 6% that most other companies offer. Therefore, the resin is intended to last longer.

Q. Why is an appropriate size mineral a.k.a Resin Tank important?

A. It is important to have a minimum of 12” to 15” of space between the top of the resin bed and the bottom of the control valve so the resin can get lifted and cleaned properly during backwash. If there is not proper space the resin will not perform properly and will go bad quickly. All of our tanks our sized properly and allow the proper 12” to 15” space.

Q. What size Brine Tank should I choose?

A. If you have the floor space choose the round 18x33 brine tank. It is built better than the rectangular and square tanks and holds more salt. We do not charge for the 18x33 brine tanks. Choose the size that is best for your application on our drop down menu. Please note: 64,000 grain capacity water softeners and up will not work properly with smaller brine tanks.

SHIPPING IS FREE TO LOWER 48 STATES ON ALL WATER SOFTENERS!
For fast delivery we ship from the closest State to you, Ohio, Florida or Arizona.

For quick delivery all water softeners ship from Florida, Ohio or Arizona!

Size Your Water Softener Here

 


Subcategories of Fleck 5600 Econominder:  

Fleck 5600 econominder Standard Tank Water Softeners

Fleck 5600 Econominder High Efficiency Water Softeners