Mechanical Meter that will still count your water usage even in the event of a power failure. this meter consist of a dome that is on the back of the 2510 valve. Inside this dome is an impeller. Coming off the top of the dome is a cable that runs to the meter assembly that is attached to the 2510 controller. When you use water, the impeller turns and that turns the cable, the cable is what turns the meter assembly which is where you have set the amount of gallons you are going to use before a regeneration.

The main difference between the 5600 model and the 2510 is:

1) Metal Back plate that holds all the components instead of plastic brackets.

2) The valve is 1" internally giving you higher flow rates with less pressure drop than the 5600 fleck valves.

3) Has Two motors instead of one. Uses a Timer motor to keep the time of day and has a heavy duty Myrcle Drive motor that is attached directly to the piston which eliminates a lot of gear movement.

This System is especially great for homes that are 2400 square feet or larger do to its ability to supply you with higher flow rates than the 5600 valves. But can also be used on smaller homes as well.

Product Details> (Opens PDF File)

$689.00
Shipping Is Free

Digital electronic meter that counts your water usage thru a electric pulse. on the discharge side of the system is a turbine assembly, attached to the assembly is a probe that goes to the SE control valve. As water runs thru it the turbine assembly sends a single to the SE controller and reads your water usage.

The main advantage that the 2510 SE has over the 2510 Econdominder is:

1) You can go into the master programming mode and customize the system by having it backwash and rapid rinse for longer or shorter periods of time, adjust salt pounds all with a touch of a button.

2 ) Solid state microprocessor with LED display. Time of day, Remaining capacity, Regeneration cycle in process.

3 ) Compact turbine meter assembly

4 ) Higher metering capability.

5 ) NOVRAM valve status and memory backup.

6 ) Reads your water usage electronically equals less moving parts than it's ancestor the Econominder.

7) Easy to Program

This System is especially great for homes that are 2400 square feet or larger do to its ability to supply you with higher flow rates than the 5600 valves. But can also be used on smaller homes as well.

Product Details> (Opens PDF File)

Mechanical Meter that will still count your water usage even in the event of a power failure. this meter consist of a dome that is on the back of the 5600 valve. Inside this dome is an impeller. Coming off the top of the dome is a cable that runs to the meter assembly that is attached to the 5600 controller.

When you use water, the impeller turns and that turns the cable, the cable is what turns the meter assembly which is where you have set the amount of gallons you are going to use before a regeneration.

The 5600 Valve has been in production since 1979!

Product Details> (Opens PDF File)

Digital Electronic Meter that counts your water usage thru a electric pulse. on the discharge side of the system is a turbine assembly, attached to the assembly is a probe that goes to the SE control valve. As water runs thru it the turbine assembly sends a single to the SE controller and reads your water usage. 

The 5600SE is no longer in production and is being replaced with the 5600SXT Controller.

Difference between the 5600 Econominder and the 5600SXT:

1). Large LCD display with 48 hours of internal power backup capacitor.

2). LCD display alternates between time of day, volume remaining or days to regeneration.

3). Compact turbine meter.

4). Downflow regeneration cycles.

5). Choose from 4 modes of operation: immediate meter regeneration, delayed meter regeneration, delayed time clock regeneration or day of week regeneration with a touch of a button.

6). Double backwash capability to clean resin bed of iron if present.

7). Higher meter capability up to 9,999 gallons compared to the 5600econdominder of 2100 gallons.

8). Reads your water usage electronically equals less moving parts than it's ancestor the Econominder.

9). Easy to Program.

Product Details> (Opens PDF File)

Mechanical Meter that will still count your water usage even in the event of a power failure. this meter consist of a dome that is on the back of the 9000 valve. Inside this dome is an impeller. Coming off the top of the dome is a cable that runs to the meter assembly that is attached to the 9000 controller. When you use water, the impeller turns and that turns the cable, the cable is what turns the meter assembly which is where you have set the amount of gallons you are going to use before a regeneration.

Important Features:

1) Regenerates with treated water.

2) You don't have to back off your meter gallons by one day for reserves do to when the meter expires on this system it regenerates right then and switches to the other tank to supply you with unlimited treated water 24 hours a day.

3) No Clock to reset incase of power loss.

4) All Brass Valve Body instead of Noryl

5) 1" Copper Manifold between Tank 1 and 2 is already put together for you.

6) The valve is 1" internally giving you higher flow rates with less pressure drop than the 5600 fleck valves.

7) Has Two motors instead of one. Uses a Timer motor to activate the regeneration process and has a heavy duty Myrcle Drive motor that is attached directly to the piston which eliminates a lot of gear movement.

Product Details> (Opens PDF File)

Noryl Valve with cam driven regeneration process.

State of the art microprocessor 460i digital meter that has jumpers that you set on the hardness of your water and the capacity of your system i.e. 32,000 grain for example.

Important Features:

1) Novram valve status and memory backup.

2) Reads your water usage electronically equals less moving parts.

3) Easy to program

Product Details> (Opens PDF File)