|
All Systems Come Completely Put Together. All you have to do is add the resin included with your water softener. It is easy to add and is explained in our online installation guide. We even supply you with the special media funnel for easier application.
Our Guarantee.
Product
materials and workmanship are protected with a written warranty
you can depend on!
- Ten Years
On Structural Wound Resin Tank and
Brine Tank
- Five Years On Prosoft Valve
- We also supply you with a lifetime worth of technical
support!
For
quick delivery all water softeners ship from Florida, Ohio
or Arizona!
Pro-Soft digital metered water softener / conditioner meters water usage and regenerates only when it needs to. Using high capacity resin, Prosoft metered on demand smart memory valve, media guard filter, stainless humidity jacket, Vortech technology and a Limited Lifetime Warranty truly make this system the best the market has to offer.
Pro-Soft System gives you the following benefits over the traditional systems.
1). Memorizes daily usage so you will not run out of soft water
2). The optional double backwash program removes iron from the resin bed. Resin expands after is has been dosed with a dilute brine solution and breaks loose attached iron which is backwashed out of the unit in the second backwash cycle. This minimizes the use of iron cleaning salts or additives
3). Less moving parts than most other controls, saving you money on eventual replacement parts and breakdowns.
4). Memory back up in case of power loss, this system will hold its memory and the time of day so no resetting needed.
5). Media guard filter of your choice to remove Chlorine, heavy metals and put a protective coating on pipes and hot water heaters to protect them from corrosion.
6). Limited Lifetime Warranty compared to traditional softeners which only have a 5 -10 year warranty and no warranty on resin.
7). Vortech tank technology supplies higher flow rates and saves Salt - Saves you money & time.
8).Stainless tank jacket that protects tank and helps the tank from sweating.
Get your Pro-Soft system today and start enjoying Soft and Conditioned water throughout your home.
All Of These Options Are Included At No Additional Charge.
Q. What is a Bypass Valve for?
A. The Bypass valve is needed to put the water softener in bypass and still have water to the house. It's like having insurance it is there if you need it, but is seldom used. Note: if you already have a bypass valve installed in your plumbing system, use the Bypass Valve drop down menu to remove it from your order. This will lower your price by $16.00.
Q. What is a Safety Float?
A. The safety float is an emergency float. Its function is to make sure that the salt tank cannot overflow salt water all over your floor if the injectors on the water softener valve get plugged up. Without the safety float you could have a mess on your hands not to mention possible damage to the floor.
Q. What is a Brine Well for?
A. Brine well isolates the air check valve on the safety float from the rock salt or potassium chloride a substitute for rock salt that is environmentally friendly and healthy for humans from clogging up the air check valve and the water softener valve.
Q. What is a Grid Plate AKA Salt Platform?
A. Grid plate is at the bottom of the salt tank its purpose is to help the salt or potassium chloride from bridging up hardening over the top of the water. When this happens the water can’t dissolve the salt so when the water softener regenerates the resin beads will not get charged and your water will be hard.
Q. Why should I use a minimum of 8% Crosslink Resin?
A. It holds up against chlorine, iron better and will perform better than the 7% crosslink resins that many dealers carry as there standard resin and charge you extra for the 8% resin. We do not charge you extra for 8% resin it is our standard resin.
Q. Why is an appropriate size mineral a.k.a Resin Tank important?
A. It is important to have a minimum of 12” to 15” of space between the top of the resin bed and the bottom of the control valve so the resin can get lifted and cleaned properly during backwash. If there is not proper space the resin will not perform properly and will go bad quickly. All of our tanks our sized properly and allow the proper 12” to 15” space.
Q. What size Brine Tank should I choose?
A. If you have the floor space choose the round 18x33 brine tank. It is built better than the rectangular and square tanks and holds more salt. We do not charge for the 18x33 brine tanks. Choose the size that is best for your application on our drop down menu. Please note: 64,000 grain capacity water softeners and up will not work properly with smaller brine tanks.
SHIPPING IS FREE TO LOWER 48 STATES ON ALL WATER SOFTENERS!
For fast delivery we ship from the closest State to you, Ohio, Florida or Arizona.
|
